Ask the Expert Question:
Can you explain the difference between total metals versus dissolved metals analysis and what form of the metal is being analyzed?
Expert Repsonse:
Total metals analysis for water samples include the metals content both dissolved in the water and present in the particulates in the water. Typically a dissolved metals analysis of a water sample is performed by removing the particulates with a filter, then analyzing the filtered water for metals. The most common filters used for this purpose have a 0.45 um pore size.
Total metals analysis results should always be greater than or equal to dissolved metals analysis results, because dissolved metals is a subset of total metals. Dissolved metals are generally considered more mobile and biologically available. Thus, the dissolved metals results are useful for risk assessment and fate & transport studies.
The specific metal species (or form) present in the dissolved fraction is highly dependent on the metal of interest. Most of the dissolved species are solvated metal cations such as Na(I) or Cr(VI). Some metals species are present as oxy anions such as arsenite.
Water solubility of the elemental metals (i.e. neutral valence state) is generally quite low. For example this website states elemental mercury [Hg(0)] has a water solubility limit of 56 ug/L at 25C (http://www.inchem.org/documents/cicads/cicads/cicad50.htm#2.1).
Most regulations use total metals results because it is often considered more conservative and protective, however, depending on the purpose of the regulation it might be based on dissolved or total metal concentrations.
View Dr. Mark Bruce's Experts profile.
